Gold Phoenix

Cart(0)

Sign In| Sign Up| My GP

New here? Get your coupons!

Gold Phoenix

0

Gold Phoenix

0

Knowledge Center

Tutorials

Recommend

Home > Support & Resource> Knowledge Center> Tutorials

Via Tenting, Plugging, and Filling

Time: 2017-11-20 21:11:54

Via Tenting, Plugging, and Filling


There are many reasons a printed circuit board designer might want to have a via tented, plugged or filled. First, let's start with defining these terms since they can be frequently misused and misunderstood.

     

     

Via Tenting, Plugging, and Filling

Section

1.Via Tenting

2.Mask (LPI) Plugged Vias (Non-Conductive Fill)

3.Via In Pad (Active Pad)

4.Conductive vs Non-Conductive Filled Vias


 

Please login and click here to download the PDF file:
I'm not a robot

Tel: 1-905-339-2881
Email: [email protected] , [email protected]
Copyright Gold Phoenix PCB Co., Ltd. 2011 - 2023

Tel: 1-905-339-2881 Email: [email protected] , [email protected]
Quality Control System   |   Products/Service   |   Friendly Links
Copyright Gold Phoenix PCB Co., Ltd. 2011 - 2023